| DOI | Resolve DOI: https://doi.org/10.4271/2023-01-1425 |
|---|
| Author | Search for: Davison, Craig1 |
|---|
| Affiliation | - National Research Council of Canada. Aerospace
|
|---|
| Format | Text, Article |
|---|
| Conference | International Conference on Icing of Aircraft, Engines, and Structures, June 20-22, 2023, Vienna, Austria |
|---|
| Subject | aircraft propulsion systems; heat transfer; conductivity; control systems; engines; icing and ice detection; humidity; pressure; water |
|---|
| Abstract | In 2017 the National Research Council of Canada developed an evaporation model for controlling engine icing tunnels in real time. The model included simplifications to allow it to update the control system once per second, including the assumption of sea level pressure in some calculations. Recently the engine icing system was required in an altitude facility requiring operation down to static temperatures of -40°C, and up to an altitude of 9.1 km (30 kft) or 30 kPa. To accommodate the larger temperature and pressure range the model was modified by removing the assumption of sea level operation and expanding the temperature range. In addition, due to the higher concentration of water vapor that can be held by the atmosphere at lower pressures, the significance of the effect of humidity on the air properties and the effect on the model was investigated. The effect of humidity on the density, specific heat, viscosity, thermal conductivity and Prandtl number of air compared to assuming dry air was examined. The effect of humidity on the individual thermodynamic and transport properties could be significant but the overall effect on the liquid water content calculated by the model to be delivered to the engine was not. The error in using the property correlations from the original model over the expanded temperature range was found to be minimal. Finally, the numerical technique was modified to decrease the solution time under extreme operating conditions. This modification increased the solution time in some standard conditions but still kept it within the required time. The new model was compared to the previous model under sea level conditions and found to give practically the same results within the expected error allowed by the solver. |
|---|
| Publication date | 2023-06-14 |
|---|
| Publisher | SAE International |
|---|
| In | |
|---|
| Language | English |
|---|
| Peer reviewed | Yes |
|---|
| Export citation | Export as RIS |
|---|
| Report a correction | Report a correction (opens in a new tab) |
|---|
| Record identifier | 04964bc6-078f-44f8-9de9-0a43e071f846 |
|---|
| Record created | 2024-07-11 |
|---|
| Record modified | 2024-07-11 |
|---|
