Language selection

Government of Canada / Gouvernement du Canada

Search

On structure borne power flow from wood studs to direct-attached gypsum board

From National Research Council Canada

Download
  1. (PDF, 376 KiB)
AuthorSearch for: 1; Search for:
Affiliation
  1. National Research Council of Canada. NRC Institute for Research in Construction
FormatText, Article
ConferenceAcoustics Week in Canada 2002, October 15, 2002, Edmonton, Alberta, Canada
SubjectAcoustics; mobilities; modeling; structure borne; power flow; SEA; transmission loss
Abstract
This paper, the second of two, examines the effect of screw location and number on the power flow from a wood stud to directly attached gypsum board. It is necessary to evaluate how an offset distance between the point of an applied force and the fastening point affects the power transmitted from the stud to the gypsum board because if the wall has resilient channels drive points and fastening points will not be aligned. Earlier studies had always considered that the points would be aligned.
Publication date
PublisherCanadian Acoustical Association
In
  • Canadian Acoustics (1 October 2002): 54–55.
LanguageEnglish
Peer reviewedYes
NRC numberNRCC 46617
NRCC 15741
NPARC number20386269
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifier08b6b31b-8780-4f6f-a92b-81a509d895ee
Record created2012-07-25
Record modified2024-05-14
Date modified: