| Abstract | This article presents a method for the design of retrofit actions with focus on energy savings that permits a systematic and thorough assessment of potential failures, anticipated maintenance and the expected durability of the retrofit actions. The proposed method combines the use of failure mode and effect analysis (FMEA) to permit identifying likely failure modes from which maintenance actions could be planned and the limit states (LS) method to assess the durability of the given retrofit action. One case study was completed to illustrate the application of: (1) the FMEA and LS method and (2) the proposed method for a retrofit action of an internal insulated solid wall of masonry bonded with lightweight aggregate concrete and floor division of concrete. It was evident that FMEA is useful regarding failure-mode identification and maintenance planning, and the LS method has its strength in durability assessment. Combining the use of both the FMEA and LS methods allowed improved design of new energy-saving retrofit actions, given that a thorough risk assessment was possible that included a decision-making process on maintenance planning, durability assessment and decision on potential redesign of retrofit actions. |
|---|
