| DOI | Resolve DOI: https://doi.org/10.1115/GT2009-60186 |
|---|
| Author | Search for: Conlon, M. J.1; Search for: Dadouche, A.1; Search for: Dmochowski, W. M.1; Search for: Payette, R.1; Search for: Bédard, J.-P.1; Search for: Liko, B.1 |
|---|
| Affiliation | - National Research Council of Canada. NRC Institute for Aerospace Research
|
|---|
| Format | Text, Article |
|---|
| Conference | ASME Turbo Expo 2009: Power for Land, Sea, and Air, June 8–12, 2009, Orlando, Florida, USA |
|---|
| Subject | bearings; steady state |
|---|
| Abstract | An experimental facility dedicated to measuring both the steady-state and dynamic properties of foil bearings, under a variety of operating conditions, has been designed and commissioned. The bearing under test is placed at the midspan of a horizontal, simply-supported, stepped shaft which rotates at up to 60 krpm. Static and dynamic loads of up to 3500 N and 450 N (respectively) can be applied by means of a pneumatic cylinder and two electrodynamic shakers. This paper outlines the test procedures and data analysis methods pertaining to the operation of the high-speed, oil-free bearing test rig, and presents steady-state and dynamic results for a first-generation foil bearing. The test bearing, which was fabricated in-house, is 0.07 m diameter and has an aspect ratio of 1; bearing manufacturing details are provided. |
|---|
| Publication date | 2009 |
|---|
| Publisher | ASME |
|---|
| In | |
|---|
| Language | English |
|---|
| Peer reviewed | Yes |
|---|
| NPARC number | 23004834 |
|---|
| Export citation | Export as RIS |
|---|
| Report a correction | Report a correction (opens in a new tab) |
|---|
| Record identifier | 37367cac-e37e-4228-8d2d-71a00dda2cb6 |
|---|
| Record created | 2019-01-03 |
|---|
| Record modified | 2020-04-16 |
|---|
