| Abstract | In recent years, there has been an increasing interest in methods to fabricate hydrophobic surfaces. Hydrophobic surfaces have been used in multiple applications in microfluidic devices to control fluid flow, as self-cleaning surfaces and also in de-icing or for drag reduction. Conventionally, hydrophobic surfaces were created by laser processing, self-assembly and other chemical processing methods. However, in many of these methods, hydrophobicity of the surface cannot be maintained for an extended time or restricted to limited set of materials. In some applications, creation of anisotropy in the hydrophobic property and the ability to pattern it, is important. Here, a low-cost, high-throughput method to generate highly hydrophobic and anisotropic surface has been developed. This method uses Computer Numerical Control machining employing diamond tools whose tips have been micro-structured using Focused Ion Beam that enables parallelization and achieves at least four times higher machining speed compared with other methods. The versatility of this method has been demonstrated by machining both metal and polymeric materials. Significant anisotropic wetting has been observed on the machined surface with the anisotropy in directional contact angle of up to 71.6°. Highly-hydrophobic surfaces with contact angle of 163.1° on 6061 Aluminum Alloy and 155.7° on polymethyl methacrylate surface were created. |
|---|
