Language selection

Government of Canada / Gouvernement du Canada

Search

Selected thermophysical properties of dense fluids using a general regularity

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1007/BF02083550
AuthorSearch for: ; Search for: ; Search for:
FormatText, Article
Subjectdense fluids; bulk modulus; isobaric expansivity; Joule-Thomson inversion temperature
Abstract
A simple equation of state is used to calculate the bulk modulus, Joule-Thomson inversion temperature, and isobaric expansivity of dense fluids (with density greater than the Boyle density). The EOS predicts the following regularities: (i) the linearity of the bulk modulus versus pressure for each isotherm of a dense fluid for a range of about 100 MPa for subcritical fluids and about 1000 MPa for supercritical fluids, (ii) the linearity of bulk modulus with respect to temperature for each isochore, and (iii) the linearity of inverse isobaric expansivity with pressure for each isochore. The regularities have been found to be consistent with experimental observations. The calculated Joule-Thomson inversion temperature shows good agreement with experimental data in the range of validity of the EOS.
Publication date
In
  • International Journal of Thermophysics 16, no. 6 (1 November 1995): 1421–1428.
LanguageEnglish
NRC publication
This is a non-NRC publication

"Non-NRC publications" are publications authored by NRC employees prior to their employment by NRC.

NPARC number12328207
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifier43603df8-4082-4faf-9520-3e172254e4a2
Record created2009-09-10
Record modified2020-04-29
Date modified: