| Abstract | The increased requirements of buildings to reduce energy use have highlighted the importance of accounting for all factors that influence energy use in buildings. One consideration that requires further study in the envelope design of concrete-based wall assemblies is the placement of the thermal mass layer. In this study, two thermally massive walls, Insulated Concrete Form (ICF) and tilt-up walls, with the same thermal resistance but different sequencing of layers are investigated. In addition, a wall made of a homogeneous insulation layer with an identical thermal resistance was considered to further investigate the thermal mass effect on the potential for energy savings. Results of the numerical simulations performed using COMSOL Multiphysics® software indicate that, for the transient scenarios investigated, thermal mass can contribute to shifting and dampening peak heating and cooling loads, as well as saving energy. Also, less intense fluctuations were observed in the heat fluxes when considering the ICF wall. Energy savings during the primary seasons (i.e. winters in Montreal and summers in Miami) are found to be marginal but the existence of a thermally massive layer considerably reduced the demands during secondary seasons i.e. summers in Montreal and winters in Miami. |
|---|
