| Abstract | In the search for a normalized procedure to replicate and compare single cell-inductively coupled plasma-mass spectrometry (SC-ICP-MS) experiments, SELM-1, a certified reference material containing selenium enriched yeast cells has been used. Selenium concentrations (both, intra- and extracellular) have been measured using either sequential or simultaneous procedures. Regarding quantitative results, the sequential procedure involving cell washing followed by freeze drying of the washed material and intracellular Se quantification using SC-ICP-MS provided best results. In this case, intracellular Se accounted for 1304 ± 48 mg kg⁻¹ (corresponding to 64% of the certified Se content). The average mass of Se per yeast cell was 41.6 fg Se with a dispersion of 1.6–279 fg Se/cell. In the isolated extracellular Se fraction, the Se concentration accounted for 412 ± 48 mg kg⁻¹ (about 21% of the total Se). Thus, the sequential procedure provided a total Se recovery of about 85% with respect to the certified value. The direct dilution and simultaneous measurement of intra- and extracellular Se by SC-ICP-MS provided results of 1024 ± 42 mg kg⁻¹ for intracellular and 316 ± 30 mg kg⁻¹ for extracellular Se representing a total recovery of about 66%. In both cases, an initial thorough characterization of the cell density per solid weighed material was conducted by flow cytometry and the cell integrity ensured using confocal microscopy. These results clearly demonstrated that with appropriate sample preparation, SC-ICP-MS is a unique tool, which is capable of providing quantitative information about intracellular and extracellular Se. In addition, SELM-1 seems the ideal tool to enable data normalization at the single cell level to replicate, benchmark, and improve new SC-ICP-MS studies by using the same material for data validation. |
|---|
