Language selection

Government of Canada / Gouvernement du Canada

Search

Dry rolling-sliding wear resistance of high density PM steel parts

From National Research Council Canada

Linkhttp://www.mpif.org/cgi-shl/TWServer.exe?Run:SESS07_1:TradeWinds_KEY=1
AuthorSearch for: 1; Search for: 1; Search for: 1; Search for: 2; Search for: 1
Affiliation
  1. National Research Council of Canada. Automotive
  2. National Research Council of Canada. Energy, Mining and Environment
FormatText, Article
Conference2012 International Conference on Powder, Metallurgy & Particulate Materials (PowderMet 2012), 10-13 June 2012, Nashville, Tennessee, USA
ISBN978-0-9853397-2-2
Abstract
As PM steel reach ever higher static and dynamic properties, their use in high performance applications is increasingly acknowledged by end-users. PM steels are now being pushed in applications where high wear resistance is required while maintaining good overall properties. Indeed, gears and cams can be subject to both rolling and sliding wear, leading to premature failure. This paper explores the effect of different alloys and process conditions on material loss in dry wear conditions. The impact of the rolling/sliding ratio is also studied. The PM component results are then compared those obtained for a wrought steel generally used in gear applications. The comparison shows that similar or even higher wear resistance can be reached by high density, high hardness PM steels.
Publication date
In
  • Advances in Powder Metallurgy & Particulate Materials—2012 : Proceedings of the 2012 International Conference on Powder Metallurgy & Particulate Materials, June 10–13, Nashville, Tennessee 2, no. part 10 (13 June 2012).
LanguageEnglish
Peer reviewedYes
NRC numberNRCC 140325
NPARC number21268105
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifier4f6a81ac-74b2-4bcc-a8b6-e5e7c5714750
Record created2013-04-11
Record modified2020-04-21
Date modified: