| DOI | Resolve DOI: https://doi.org/10.1007/s40870-018-00180-w |
|---|
| Author | Search for: Huneault, J.; Search for: Pepper, J. E.; Search for: Rahmat, M.1; Search for: Ashrafi, B.1; Search for: Petel, O. E. |
|---|
| Affiliation | - National Research Council of Canada. Aerospace
|
|---|
| Format | Text, Article |
|---|
| Subject | spall; epoxy composite; carbon nanotube (CNT); fracture; impact |
|---|
| Abstract | The increasing use of polymer nanocomposites in armor applications requires an understanding of how these materials behave at strain-rates relevant to ballistic impacts. Of particular interest is the role of the microstructure on the failure of these materials under dynamic tensile loading. In the present study, plate impact experiments were conducted in order to measure the spall strength of a neat epoxy (EPON 828) and an epoxy–carbon nanotube composite. The addition of pristine carbon nanotubes (CNTs) to the epoxy resulted in a composite material with a lower spall strength than the neat epoxy matrix material. Recovered composite fragments were imaged with a scanning electron microscope. Instances of nanotube pull-out were identified on internal fracture surfaces. The lower spall threshold of the epoxy–CNT composite was attributed to the comparatively weak epoxy–CNT interface, which provides potential sites from which spall failure can favorably nucleate. |
|---|
| Publication date | 2019-01-03 |
|---|
| Publisher | Springer |
|---|
| In | |
|---|
| Language | English |
|---|
| Peer reviewed | Yes |
|---|
| Export citation | Export as RIS |
|---|
| Report a correction | Report a correction (opens in a new tab) |
|---|
| Record identifier | 65d11302-3cb9-4c7c-abef-8939efde8ce5 |
|---|
| Record created | 2019-06-10 |
|---|
| Record modified | 2020-03-16 |
|---|
