Broadband ultrasonic backscattering applied to nondestructive characterization of materials

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1109/TUFFC.2004.1320742
AuthorSearch for: ; Search for: ; Search for:
FormatText, Article
Abstract
A simple method based on the spectrum features of the backscattered signal is proposed to the assessment of scatterers size. The method takes advantage of the band-limited response of the scattering media to an incident broadband pulse. The single to multiple scattering regime transition determines this limited frequency content, which is strongly related to scatterer size. The method is applied to the estimation of graphite particle sizes in cast irons. Good quantitative correlation is obtained between graphite sizes measured by metallography and that obtained using this new ultrasonic method, in spite of the band limitations of the ultrasonic system used in the experiment. By this method, the absolute mean value of the scatterer size can be evaluated, provided that a reasonably good estimate of the concentration of particles is known.
Publication date
PublisherIEEE
In
  • IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 51, no. 7: 832–838.
LanguageEnglish
Peer reviewedYes
NRC publication
This is a non-NRC publication

"Non-NRC publications" are publications authored by NRC employees prior to their employment by NRC.

NPARC number23003000
Export citationExport as RIS
Report a correctionReport a correction
Record identifier7b38541d-898d-4bc8-b05d-38f17b3f06e3
Record created2018-04-11
Record modified2020-04-17
Report a problem on this page
Date modified: