In-situ shear tester

From National Research Council Canada

AuthorSearch for: 1
Name affiliation
  1. National Research Council of Canada
FormatText, Technical Report
Series titleLaboratory Memorandum (National Research Council of Canada. Institute for Marine Dynamics); no. LM-1994-25
Abstract
The present method of shear testing at IMD is the hole and punch method. Experimental data has shown that shear strength values are influenced by specimen surface area and brine drainage using the present shear testing procedure. The influence of specimen surface area and brine drainage on shear strength could be eliminated using an in-situ procedure. An in-situ testing device has been designed.
Publication date
PublisherNational Research Council of Canada. Institute for Marine Dynamics
PlaceSt. John's, Newfoundland
LanguageEnglish
Peer reviewedNo
NRC numberNRC-IOT-6101
NPARC number8895064
Export citationExport as RIS
Report a correctionReport a correction
Record identifier8e925f89-9a70-4e78-ba6d-c9bb3ecb4a30
Record created2009-04-22
Record modified2020-11-19
Report a problem on this page
Date modified: