Cold sprayed Cu-MoS2 and its fretting wear behavior

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1007/s11666-015-0372-6
AuthorSearch for: ; Search for: ; Search for: ; Search for: 1 
Name affiliation
  1. National Research Council Canada. Automotive and Surface Transportation
FormatText
TypeArticle
Journal titleJournal of thermal spray technology
ISSN1059-9630
1544-1016
Subjectcold spray; Cu-MoS2 composite; fretting; normal load; wear debris bed
Abstract
Cu and Cu-MoS2 coatings were fabricated by cold spray, and the fretting wear performance of the two coatings was compared. A mixture (95 wt.% Cu + 5 wt.% MoS2) was used as feedstock for the composite coating. Coatings were sprayed with identical gas flow conditions on the substrates pre-heated to approximately 170 °C. The morphology of coating top surface and polished cross sections was analyzed by scanning electron microscopy (SEM) and light optical microscopy (LOM). The influence of MoS2 on Cu deposition was examined. The local MoS2 concentration within the coating was found to affect the hardness. Fretting tests were carried out at two different normal loads, and the influence of MoS2 on friction and wear was studied. The morphology and elemental compositions of the wear scars and wear debris were observed by SEM and energy dispersive x-ray spectroscopy (EDS), respectively.
Publication date
Terms of use
LanguageEnglish
Peer reviewedYes
NRC numberNRC-AST-BOU-0001
NPARC number21277261
Export citationExport as RIS
Report a correctionReport a correction
Record identifier983abde2-1eac-47b0-8d57-e80fd13544e2
Record created2016-01-26
Record modified2017-07-27
Date modified:
Report a problem on this page