Language selection

Government of Canada / Gouvernement du Canada

Search

Analytical solutions for sagittal plane plate waves in composites

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1109/ULTSYM.1992.275977
AuthorSearch for: ; Search for: 1; Search for:
Affiliation
  1. National Research Council of Canada. NRC Industrial Materials Institute
FormatText, Article
ConferenceIEEE 1992 Ultrasonics Symposium Proceedings, October 20-23, 1992, Tucson, AZ
SubjectSolids; Chemical and biological sensors; Thin film sensors; Biosensors; Liquids; Probes; Acoustic sensors; Frequency; Velocity measurement; Optical films
Abstract
Propagation characteristics of sagittal plane plate waves in a composite plate loaded by a liquid of finite thickness are presented. The composite consists of a solid isotropic plate sandwiched between two acoustically thin (< < λ ) isotropic solid films, where λ is the acoustic wavelength. The solutions are separately derived for the symmetric and antisymmetric modes. For each type of mode, an approximately analytical dispersion equation is given. Numerical calculations for the lowest symmetric and antisymmetric modes of such a structure are shown. The phase velocity of sagittal plane plate waves changes with the thickness of the thin solid films and that of the liquid, and significantly for the lowest symmetric mode when the liquid thickness is around 0.25 liquid wavelength. Applications pertinent to sensors such as mass sensitivity variation due to the presence of thin solid films and liquids are presented.
Publication date
PublisherIEEE
In
  • IEEE 1992 Ultrasonics Symposium Proceedings: 381–386.
LanguageEnglish
Peer reviewedYes
NRC numberCNRC 33738
NRC-IMI92TC-10300-1296-G
NPARC number23004679
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifier997bab25-f91e-4761-a5c7-dadcaeccfc0b
Record created2018-12-10
Record modified2020-04-23
Date modified: