Wavelength-division multiplexing of nano-optomechanical doubly clamped beam systems

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1364/OL.40.001948
AuthorSearch for: ; Search for: 1 ; Search for: 1 ; Search for: 1 
Name affiliation
  1. NINT
FormatText
TypeArticle
Journal titleOptics Letters
ISSN0146-9592
1539-4794
Volume40
Issue9
Pages1948–1951
Subjectintegrated optics devices; micro-optical devices; sensors; optomechanics; optical microelectromechanical devices; nanophotonics and photonic crystals
Abstract
Wavelength-division multiplexing is demonstrated for a set of two doubly clamped beams. Using a single input/output waveguide in a nanophotonic detection system, the two mechanical beams are independently addressable using different wavelength channels as determined by their respective racetrack resonator detection cavities. The two cavities slightly overlap, which also enables the mechanical frequency of both beams to be detected simultaneously with a single wavelength. Finally, to physically map which wavelength channel corresponds to which specific device, a heating laser is targeted individually on each beam to create a reversible mechanical frequency shift. This multiplexing method would allow for the simpler detection of large arrays of nanomechanical devices in a sensor system.
Publication date
PublisherOptical Society of America
Terms of use
LanguageEnglish
Peer reviewedYes
NPARC number23001714
Export citationExport as RIS
Report a correctionReport a correction
Record identifier9e3f4fc4-2fa1-4cc2-89c9-6703ed1df1f1
Record created2017-03-21
Record modified2017-03-21
Date modified:
Report a problem on this page