Sampling current ratio measurement system for calibration of current transducers up to 10 kA With 5 • 10‾⁶ uncertainty

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1109/TIM.2015.2395571
AuthorSearch for: ; Search for: ; Search for: 1 
Name affiliation
  1. National Research Council Canada. Measurement Science and Standards
FormatText
TypeArticle
Journal titleIEEE Transactions on Instrumentation and Measurement
ISSN0018-9456
1557-9662
Volume64
Issue6
Pages1685–1691
Abstract
A sampling current ratio measurement system has been developed, tested, and validated for the accurate complex ratio measurement of ac current transducers. Calibrations can be performed for primary currents up to 10 kA with typical expanded uncertainties of 5 • 10‾⁶ in magnitude and 5 μrad in phase (k = 2). A unique property of the system is the use of digitizers for sampling of the secondary current signals and step-down transformers with a large number of current ratios. Therefore, the system does not require the current transducer under test to be a current transformer having a nominal ratio equal to the reference current transformer. Furthermore, it allows for the accurate calibration of a large variety of different current transformers and other types of current transducers. A bilateral comparison between VSL and NRC confirms the stated uncertainty.
Publication date
PublisherIEEE
LanguageEnglish
Peer reviewedYes
NPARC number23001603
Export citationExport as RIS
Report a correctionReport a correction
Record identifiera5e00f90-2bd7-40f6-96a5-11e41669bb07
Record created2017-03-09
Record modified2017-03-16
Date modified:
Report a problem on this page