| DOI | Resolve DOI: https://doi.org/10.1115/OMAE2022-78578 |
|---|
| Author | Search for: Zaman, M. Hasanat1; Search for: Akinturk, Ayhan1 |
|---|
| Affiliation | - National Research Council Canada. Ocean, Coastal and River Engineering
|
|---|
| Format | Text, Article |
|---|
| Conference | ASME 2022 41st International Conference on Ocean, Offshore and Arctic Engineering, June 5-10, 2022, Hamburg, Germany |
|---|
| Subject | wave force; topside loads; gravity-based offshore structure; 3D wave models; mass, momentum; energy OrcaFlex |
|---|
| Abstract | The oil and gas companies extended their activities in the offshore area of the North Seas. The presence of extreme environmental waves imparts extra risks to the operations of the offshore fixed and floating structures in these areas. The operation and safety of these offshore structures are considerably disturbed during the propagation of large waves over the region. The Newfoundland coast experienced very high waves during an intense ever storm in 2018 that brought waves with very large wave heights at various locations. This paper reports the loadings of such high waves on the shaft of a Gravity-Based Structure (GBS). A 3D non-linear dispersive mass, momentum, and energy model (MME) with second-order in wave amplitudes, and OrcaFlex™, a commercial numerical tool are used for the simulation of loads on the structure. The 3D numerical model describes the characteristics of the wavefield in terms of mass, momentum, and energy flux conservation equations. OrcaFlex™ is a 3D non-linear time-domain finite element implicit and explicit software that uses lumped mass elements to simplify equations, has diffraction capability, and makes the computation efficient. In the simulations, parameters for incident wave conditions are varied systematically to study various cases and data comparisons between the two numerical simulators are made. The geometry of the GBS was kept constant. The water depth is assumed to be 80m and the shaft length is 95m with a diameter of 30m. The simulation is carried out for 3 hours in each case.
New data and information that would be produced from this work are important for possible use in the design method of a GBS and thus increase structural and operational safety exclusively in the harsh environment or in the existence of freak waves. |
|---|
| Publication date | 2022-06-05 |
|---|
| Publisher | American Society of Mechanical Engineers |
|---|
| In | |
|---|
| Language | English |
|---|
| Peer reviewed | Yes |
|---|
| Export citation | Export as RIS |
|---|
| Report a correction | Report a correction (opens in a new tab) |
|---|
| Record identifier | b1d0d2b0-8316-4cb9-a94b-797c00009773 |
|---|
| Record created | 2025-06-11 |
|---|
| Record modified | 2025-06-11 |
|---|
