| Téléchargement | - Voir la version finale : A lapping-based test method to investigate wear behaviour of bonded-abrasive tools (PDF, 1.2 Mio)
|
|---|
| DOI | Trouver le DOI : https://doi.org/10.1016/j.cirp.2022.04.049 |
|---|
| Auteur | Rechercher : Macerol, Nastja; Rechercher : Franca, Luiz; Rechercher : Attia, Helmi1Identifiant ORCID : https://orcid.org/0000-0002-4705-5311; Rechercher : Krajnik, PeterIdentifiant ORCID : https://orcid.org/0000-0002-9362-2196 |
|---|
| Affiliation | - Conseil national de recherches du Canada. Aérospatiale
|
|---|
| Format | Texte, Article |
|---|
| Sujet | super abrasive; cubic boron nitride (cBN); wear |
|---|
| Résumé | Grinding-wheel wear is a critical factor affecting grinding performance and tool cost. Unfortunately, wear tests – particularly with superabrasives – can be notoriously time-consuming. Therefore, a novel lapping-based method is proposed for investigating wear behaviour of the grit-bond system. Wear tests were performed in (i) lapping, (ii) surface grinding, and (iii) cylindrical grinding for a range of grit-shape aspect ratios and grit-toughness values for the same grit-bond systems. Results showed that all three methods yielded similar trends. This indicates that the lapping tests could be a viable substitute for lengthy grinding tests, resulting in shorter testing times and smaller specimen sizes. |
|---|
| Date de publication | 2022-07-12 |
|---|
| Maison d’édition | Elsevier |
|---|
| Licence | |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Identificateur | S0007850622001020 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | 04b1d040-dc63-4b5e-98c5-7ae7bf352fdf |
|---|
| Enregistrement créé | 2023-09-20 |
|---|
| Enregistrement modifié | 2023-09-20 |
|---|
