| DOI | Trouver le DOI : https://doi.org/10.1007/s40242-015-5092-4 |
|---|
| Auteur | Rechercher : Chang, Qing; Rechercher : Li, Li; Rechercher : Yang, Dalei; Rechercher : Zhang, Mingyao; Rechercher : Ton-That, Minh-Tan1; Rechercher : Hu, Wei; Rechercher : Lü, Shuai |
|---|
| Affiliation | - Conseil national de recherches du Canada. Automobile et les transports de surface
|
|---|
| Format | Texte, Article |
|---|
| Sujet | poly(ω-pentadecalactone); polymerization; characterization |
|---|
| Résumé | The synthesis of biomaterial poly(ω-pentadecalactone)(PPDL) with yttrium isopropoxide as initiator in bulk was explored for its industrial-scale production. The weight-average molecular weight(M¯w) of PPDL could be controlled by the molar ratio of monomer to initiator(M/I), polymerization temperature(Tp) and period(tp). The synthesis conditions were optimized, and a high M¯w of 9.2×104 of PPDL could be obtained by the reaction at an M/I molar ratio of 1000/1 and 100 °C for only 30 min, which presented tough properties with a tensile strength of about 20 MPa and an elongation at break of about 300%. This mechanical property was comparable to that of high density polyethylene(HDPE). The melting point was about 96 °C, and 5% of mass loss temperature(T5%) was as high as 340 °C. Thus, the PPDL with good mechanical properties and high thermal stability can be synthesized without solvent at low expenses. |
|---|
| Date de publication | 2015-06-04 |
|---|
| Maison d’édition | Springer |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Numéro NPARC | 23001635 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | 04e1e455-a119-497f-9d2e-66a0cfe86208 |
|---|
| Enregistrement créé | 2017-03-13 |
|---|
| Enregistrement modifié | 2024-08-02 |
|---|
