DOI | Trouver le DOI : https://doi.org/10.1115/GT2009-59686 |
---|
Auteur | Rechercher : Gostelow, J. P.1; Rechercher : Mahallati, A.1; Rechercher : Andrews, S. A.1; Rechercher : Carscallen, W. E.1 |
---|
Affiliation | - Conseil national de recherches du Canada. Institut de recherche aérospatiale du CNRC
|
---|
Format | Texte, Article |
---|
Conférence | ASME Turbo Expo 2009: Power for Land, Sea, and Air, June 8–12, 2009, Orlando, Florida, USA |
---|
Sujet | nozzles; turbines; computation |
---|
Résumé | Experimental and computational results are presented from cascade testing on the nozzle blading of a high pressure ratio single stage turbine. Testing on this blading in 1986 showed surprising evidence of a redistribution of the downstream total temperature field. The nozzle midspan section has subsequently been tested in a large scale low aspect ratio planar cascade, having a continuous room-temperature inlet flow, to obtain more detailed information over the subsonic and transonic speed ranges. The blades had a blunt trailing edge which caused strong von Kármán vortex shedding throughout the subsonic range. This was shown to result in Eckert-Weise effect temperature redistribution. The first time-resolved measurements of this effect were measured in this cascade. Unusual vortex configurations were also observed at transonic speeds. The purpose of the current observations was to obtain reliable time-averaged measurements of flow through the cascade, which is proving to be an excellent vehicle for validating CFD predictions. A three-hole finger probe was traversed at the inlet and outlet of the cascade to evaluate the aerodynamic performance. Mach number and base pressure distributions, together with schlieren and surface oil-flow visualization, aided understanding of flow and loss behavior. Two-dimensional numerical simulations were performed over the speed range. The results assisted understanding of the influence of Mach number on losses and flow structures, specifically the shock configurations and base pressures. Comparisons of numerical results and experimental measurements of the flow-field showed good agreement. |
---|
Date de publication | 2009 |
---|
Maison d’édition | ASME |
---|
Dans | |
---|
Langue | anglais |
---|
Publications évaluées par des pairs | Oui |
---|
Exporter la notice | Exporter en format RIS |
---|
Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
---|
Identificateur de l’enregistrement | 281dc706-03c4-41a8-a148-9444669ca2a4 |
---|
Enregistrement créé | 2019-03-06 |
---|
Enregistrement modifié | 2020-04-16 |
---|