DOI | Trouver le DOI : https://doi.org/10.4028/www.scientific.net/AMR.409.859 |
---|
Auteur | Rechercher : Kabir, Abu Syed Humaun1; Rechercher : Cao, Xinjin1; Rechercher : Gholipour Baradari, Javad1; Rechercher : Wanjara, Priti1; Rechercher : Cuddy, Jonathan; Rechercher : Birur, Anand; Rechercher : Medraj, Mamoun |
---|
Affiliation | - Conseil national de recherches du Canada. Institut de recherche aérospatiale du CNRC
|
---|
Format | Texte, Article |
---|
Conférence | 7th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC'2011, August 1-5, 2011, Quebec City, QC, Canada |
---|
Sujet | defocusing; digital image correlations; failure locations; full-field; fusion zones; ND : YAG lasers; tensile behaviour; three-dimensional deformations; Ti-6Al-4V; Ti-6Al-4V alloy; underfills; welding speed; alloys; aluminum; cerium alloys; elastic moduli; fracture; heat affected zone; neodymium lasers; plastic deformation; tensile properties; three dimensional; titanium; vanadium; vanadium alloys; welding; yield stress; titanium alloys |
---|
Résumé | In this study, the global and local tensile behaviours of laser welded 5.1-mm thick Ti-6Al-4V alloy were obtained at various welding speeds and defocusing distances using a digital image correlation (DIC) technique with a full field three-dimensional deformation measurement system. The local tensile properties including elastic modulus, yield stress, and maximum plastic strain were determined at various locations by assuming an iso-stress condition. It was found that the elastic modulus and yield stress were maximum in the fusion zone (FZ) and minimum in the heat-affected zone (HAZ). Porosity and underfill defects were the main reasons for the failures in the FZ and/or the HAZ. Maximum plastic strain at fracture was observed at the failure location in most cases. |
---|
Dans | |
---|
Langue | anglais |
---|
Publications évaluées par des pairs | Oui |
---|
Numéro NPARC | 21270214 |
---|
Exporter la notice | Exporter en format RIS |
---|
Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
---|
Identificateur de l’enregistrement | 326a8698-219c-43c5-a7c2-81db9933dae1 |
---|
Enregistrement créé | 2014-01-13 |
---|
Enregistrement modifié | 2020-04-22 |
---|