Téléchargement | - Voir le manuscrit accepté : Stress corrosion cracking mitigation of 7075-T6 aluminum alloy by thermal spray coatings (PDF, 1.6 Mio)
|
---|
Auteur | Rechercher : Arsenault, B.1; Rechercher : Simard, S.; Rechercher : Marcoux, P.; Rechercher : Ghali, E. |
---|
Affiliation | - Conseil national de recherches du Canada. Institut des matériaux industriels du CNRC
|
---|
Format | Texte, Article |
---|
Conférence | NACE International Corrosion Conference 2006, March 12-16, 2006, San Diego, California, USA |
---|
Sujet | Stress corrosion cracking; metallic coating; 7075 Aluminum alloy; thermal spray |
---|
Résumé | High strength Al alloys used in aircraft structures are susceptible to stress corrosion cracking (SCC) in chloride containing environments. This paper outlines the work done to prevent SCC on 7075-T6 aluminum alloys as a function of the surface conditioning and with three different galvanic coatings. Coatings of pure Al, Al-Mg, and Al-Mg-Zn were applied by twin wire arc spraying and evaluated in 3.5 wt. % NaCl solution. Environment assisted cracking tests were performed using a four point loading set up under tensile fluctuating load at low frequency (0.1 Hz). Results indicate that shot peening is beneficial and SCC is inhibited by anodic thermal spray metallic coatings. |
---|
Date de publication | 2006-01-01 |
---|
Dans | |
---|
Langue | anglais |
---|
Publications évaluées par des pairs | Non |
---|
Numéro du CNRC | NRCC 48846 |
---|
Numéro NPARC | 18398989 |
---|
Exporter la notice | Exporter en format RIS |
---|
Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
---|
Identificateur de l’enregistrement | 434bda7b-c8df-41ac-a14c-f1e1253566c3 |
---|
Enregistrement créé | 2011-08-17 |
---|
Enregistrement modifié | 2020-04-22 |
---|