| Résumé | Turbulence modelling is a major issue, affecting the precision of current numerical simulations, particularly for reacting flows. The RANS (Reynolds‐averaged Navier‐Stokes) modelling of turbulence is necessary in the development of advanced combustion systems in the foreseeable future. Therefore, it is important to understand advantages and limitations of these models. In this chapter, six widely used RANS turbulence models are discussed and validated against a comprehensive experimental database from a model combustor. The results indicate that all six models can catch the flow features; however, various degrees of agreement with the experimental data are found. The Reynolds stress model (RSM) gives the best performance, and the Rk‐ε model can provide similar predictions as those from the RSM. The Reynolds analogy used in almost all turbulent reacting flow simulations is also assessed in this chapter and validated against the experimental data. It is found that the turbulent Prandtl/Schmidt number has a significant effect on the temperature field in the combustor. In contrast, its effect on the velocity field is insignificant in the range considered (0.2–0.85). For the present configuration and operating conditions, the optimal turbulent Prandtl/Schmidt number is 0.5, lower than the traditionally used value of 0.6–0.85. |
|---|
