| Téléchargement | - Voir le manuscrit accepté : Effect of adsorptive fouling on membrane performance: case study with a pulp mill effluent (PDF, 1.2 Mio)
|
|---|
| DOI | Trouver le DOI : https://doi.org/10.1016/0011-9164(95)00018-W |
|---|
| Auteur | Rechercher : Dal-Cin, M. M.1; Rechercher : Striez, C. N.1; Rechercher : Tweddle, T. A.1; Rechercher : Capes, C. E.1; Rechercher : McLellan, F.; Rechercher : Buisson, H. |
|---|
| Affiliation | - Conseil national de recherches du Canada. Institut de technologie des procédés chimiques et de l'environnement du CNRC
|
|---|
| Format | Texte, Article |
|---|
| Sujet | Fouling; Adsorption; Ultrafiltration; Pulp mill waste |
|---|
| Résumé | The compatibility of a wide range of membrane materials with a pulp mill effluent was evaluated with respect to adsorptive fouling. Membranes were initially evaluated by their pure water permeability and separation characteristics with a polyethylene glycol test solute. These membrane coupons were contacted with a pulp mill effluent sample at 50 C in the absence of a transmembrane pressure for 3 h and then recharacterized. The change in the separation and permeation was interpreted as changes in the average pore size and the ratio of the number of pores to the effective pore length of the membrane. A decreasing pore size indicated the formation of an adsorbed fouling layer. An increased ratio suggested that adsorption occurred on the membrane surface rather than in the pores. |
|---|
| Date de publication | 1995 |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Numéro du CNRC | NRCC 37572 |
|---|
| Numéro NPARC | 8925768 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | 85a8a600-ccec-48e5-83f3-ce5e49bc1352 |
|---|
| Enregistrement créé | 2009-04-23 |
|---|
| Enregistrement modifié | 2020-04-29 |
|---|
