DOI | Trouver le DOI : https://doi.org/10.1177/0021998311412986 |
---|
Auteur | Rechercher : Dubé, M.; Rechercher : Hubert, P.; Rechercher : Gallet, J.N.A.H.; Rechercher : Stavrov, D.; Rechercher : Bersee, H.E.N.; Rechercher : Yousefpour, A.1 |
---|
Affiliation | - Conseil national de recherches du Canada. Aérospatiale
|
---|
Format | Texte, Article |
---|
Sujet | Joints/joining; Lap shear; Lap shear strength; Metal mesh; Size effects; Thermoplastic composite; Wire diameter; Composite materials; Ethers; Ketones; Organic compounds; Polymer matrix composites; Resistance welding; Thermoplastics; Welding; Electric heating elements; Composites; Electric Heating; Ethers; Joining; Joints; Ketones; Thermoplastics; Welding |
---|
Résumé | The objective of this work is to determine the effects of metal mesh heating element size on resistance welding of thermoplastic composites. The materials to be resistance-welded consisted of carbon fiber/poly-ether-ketone- ketone (CF/PEKK), carbon fiber/poly-ether-imide (CF/PEI) and glass fiber/PEI (GF/PEI). Four different metal mesh sizes were used as heating elements. The samples were welded in a lap shear joint configuration and mechanically tested. Maximum Lap Shear Strengths of 52, 47 and 33 MPa were obtained for the CF/PEKK, CF/PEI and GF/PEI specimens, respectively. The ratio of the heating element's fraction of open area and wire diameter was shown to be the most important parameter to be considered when selecting an appropriate heating element size. © The Author(s) 2011. |
---|
Date de publication | 2012 |
---|
Dans | |
---|
Langue | anglais |
---|
Publications évaluées par des pairs | Oui |
---|
Numéro NPARC | 21269467 |
---|
Exporter la notice | Exporter en format RIS |
---|
Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
---|
Identificateur de l’enregistrement | 8a6c5154-b798-46e2-8ad9-7c233761c7f8 |
---|
Enregistrement créé | 2013-12-12 |
---|
Enregistrement modifié | 2020-04-21 |
---|