DOI | Trouver le DOI : https://doi.org/10.4271/2015-01-05 |
---|
Auteur | Rechercher : Liu, Xiaoyang; Rechercher : Quan, Guangchun; Rechercher : Wu, Xijia1; Rechercher : Zhang, Zhong1; Rechercher : Sloss, Clayton |
---|
Affiliation | - Conseil national de recherches du Canada. Aérospatiale
|
---|
Format | Texte, Article |
---|
Conférence | SAE 2015 World Congress and Exhibition, September 22-24, 2015, Seattle, Washington, USA |
---|
Sujet | thermomechanical fatigue; ductile cast iron; simulation and modeling |
---|
Résumé | In this paper, both standard and constrained thermomechanical fatigue (TMF) tests were conducted on a high silicon ductile cast iron (DCI). The standard TMF tests were conducted with independent control of mechanical strain, out-of-phase (OP) and in-phase (IP) strain, and temperature in the range from 300 to 800°C. The constrained TMF tests were conducted with various constraint ratios of 100%, 70%, 60% and 50% at the temperature ranges of 160 to 600°C and 160 to 700°C. Based on a material model as calibrated with low-cycle fatigue (LCF) data of DCI, finite element analyses (FEA) of the above TMF tests were carried out with Abaqus. A damage mechanism-based lifetime model was integrated into a C++ API code to post-process the Abaqus output results. Simulation predictions show good agreement with experiments for stress-strain responses and lifetime under different TMF conditions. |
---|
Date de publication | 2015-04-14 |
---|
Dans | |
---|
Langue | anglais |
---|
Publications évaluées par des pairs | Oui |
---|
Numéro NPARC | 21277292 |
---|
Exporter la notice | Exporter en format RIS |
---|
Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
---|
Identificateur de l’enregistrement | b25ceb05-52e9-4eba-868d-ffafed02b38f |
---|
Enregistrement créé | 2016-02-09 |
---|
Enregistrement modifié | 2020-04-22 |
---|