| Auteur | Rechercher : Bureau, M. N.1; Rechercher : Ton-That, T. M.1 |
|---|
| Affiliation | - Conseil national de recherches du Canada. Institut des matériaux industriels du CNRC
|
|---|
| Format | Texte, Article |
|---|
| Conférence | 11th-Annual Automotive Composites Conference and Exhibition: Driving Design, ACCE 2011, September 13-15, 2011, Troy, Michigan, United States |
|---|
| Sujet | automobile exhibitions; cavitation stress; clay nanocomposites; control experiments; compatibilizers; copolymers; coupling agents; ethylene; ethylene propylene copolymers; flat sheets; high impact; impact property; maleic anhydride; Masterbatch; micro-structural; nanocomposites; organoclay content; organoclays; plastic products; stress and strain; tensile properties; toughening effects; twin screw extruders; Young's Modulus; yield stress |
|---|
| Résumé | Different compatibilization strategies from master batch mixing using a twin-screw extruder with various coupling agents were investigated to improve the stiffness of nanocomposites based on a high impact TPO (n-lzod > 600 J/m) with 2% and 4% of organoclay content. Three coupling agents based on grafted maleic anhydride polymers (gMA) were used to tailor the compatibility of the organoclays to either or both the rubbery domains and the polyolefin matrix. A detailed microstructural of the different nanocomposites revealed the preferential presence of organoclays in the rubbery domains, the matrix or both depending on the masterbatch sequential compounding strategy, i.e. the type of coupling agent(s) mixed with the type of organoclay. As anticipated, the presence of organoclays in both the matrix for improved tensile properties (Young's modulus and stress and strain at yield) and in the rubbery domains for higher impact resistance (n-lzod at 0 and 23°C and flat sheet impact at -40°C). A control experiment on a blend of PP and an ethylene-propylene copolymer with a PPgMA coupling agent and organoclay compounded in a similar fashion led to the usually improved tensile properties but reduced impact resistance. In this case, the organoclay was found present in the matrix only, as the coupling agent used could not compatibilize the organoclay to the copolymer phase. It is concluded that organoclays act on the rubbery phase to increase its toughening effect in the TPO, presumably by increasing the cavitation stress of the TPO. |
|---|
| Date de publication | 2011 |
|---|
| Maison d’édition | Society of Plastics Engineers |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Numéro NPARC | 21271079 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | d284f99f-db36-45de-b038-daed3084596f |
|---|
| Enregistrement créé | 2014-03-24 |
|---|
| Enregistrement modifié | 2024-08-08 |
|---|
