| Résumé | The thermal-optical analysis (TOA) of black carbon in particulate matter (PM) collected on filters has been recommended and used for the calibration of mass-concentration instruments. However, filter-based TOA calibrations have substantial practical limitations, requiring high sample flow rates (>10 litres per minute), long sampling times (up to 3 h), and subsequently manual filter processing with long analysis times (>15 min per filter). These limitations are avoided by in situ calibration techniques such as the centrifugal particle mass analyzer (CPMA)–electrometer reference mass system (CERMS). The CERMS is capable of producing and monitoring in situ reference mass concentrations below 1 µg m⁻³ and in real-time (∼1 Hz). Additional advantages of the CERMS are its improved repeatability (1.1%) over TOA (9–11%), and its measurement of a well-defined quantity: total post-CPMA suspended PM mass. In the present work, we demonstrate closure between these two techniques in terms of PM mass concentration for three different soot generators (viz., the Argonaut miniature inverted soot generator, Jing miniCAST, and National Research Council inverted-flame burner) under carefully controlled conditions. We also demonstrate the sensitivity of the CERMS by characterizing the limits of detection of a commercial laser-induced incandescence instrument and a photoacoustic instrument. Our data support the use of the CERMS with well-characterized PM sources to provide reference mass concentrations for the calibration of instruments measuring PM or black-carbon mass concentration. |
|---|
