| Résumé | Cold spray (CS) MCrAlY coatings have been widely explored as potential bond coats for thermal barrier coatings used on the hot-section components of modern gas turbines. In this study, NiCoCrAlTaY coatings were applied on CMSX-4 single-crystal Ni-base superalloy substrates using the CS technique. Nitrogen was used as process gas with low spray parameters to allow the production of in-situ nanocrystalline NiCoCrAlTaY coatings while using conventional powders of large grain size, as demonstrated in Part I of the study using scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM). In this part of the study (Part II), the coated samples were examined under isothermal oxidation conditions at 1100 °C for 1 h to 500 h. The as-deposited NiCoCrAlTaY coatings, characterized by dense microstructure, low surface roughness, nanoscale grains, and a large number of crystallographic defects such as grain boundaries and dislocations, promoted the formation of a protective α-Al₂O₃ scale during short-term oxidation. Fast diffusion via these crystallographic defects facilitated Al diffusion in the coatings. This provides sufficient Al replenishment to the coating subsurface region, sustaining the growth of the α-Al₂O₃ scale during prolonged oxidation. The relatively low scale growth kinetics found in the study demonstrated enhanced oxidation performance of the CS nanocrystalline NiCoCrAlTaY coatings. |
|---|
