| Auteur | Rechercher : Derisi, B.; Rechercher : Hoa, S.; Rechercher : Xu, D.; Rechercher : Hojjati, M.1 |
|---|
| Affiliation | - Conseil national de recherches du Canada
|
|---|
| Format | Texte, Article |
|---|
| Conférence | 26th Annual Technical Conference of the American Society for Composites 2011 and the 2nd Joint US-Canada Conference on Composites, 26 September 2011 through 28 September 2011, Montreal, QC |
|---|
| Sujet | Aluminum tubes; Bending load; Composite tube; Design of composites; Large deformations; Primary loads; Radial stress; Simulation methods; Simulation procedures; Strategic locations; Three-dimensional finite element method; Bending (forming); Deformation; Finite element method; Stiffness; Tubes (components) |
|---|
| Résumé | A procedure to design composite tubes that can match the stiffness, strength, and deformation of an aluminum tube used for primary load bearing applications is presented. Tubes subjected to bending loads are considered. The large deformation of the composite tube is obtained via strategic location of plies of suitable fiber orientations across the thickness of the tube. Two analytical and simulation methods for the determination of stiffness are proposed, and their accuracy is verified by experimental results. Three-dimensional finite element method is used to determine the stresses developed, and a procedure to handle the high positive radial stress is proposed. |
|---|
| Date de publication | 2011 |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Numéro NPARC | 21271620 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | f0898170-e751-4220-a248-6e107156edd8 |
|---|
| Enregistrement créé | 2014-03-24 |
|---|
| Enregistrement modifié | 2020-04-21 |
|---|
