| DOI | Resolve DOI: https://doi.org/10.1016/j.matlet.2018.12.060 |
|---|
| Author | Search for: Li, Shuhan; Search for: Chen, Yuhua; Search for: Kang, Jidong; Search for: Amirkhiz, Babak Shalchi; Search for: Nadeau, Francois1 |
|---|
| Affiliation | - National Research Council of Canada. Automotive and Surface Transportation
|
|---|
| Format | Text, Article |
|---|
| Subject | welding; advanced high strength steel; aluminum alloy; intermetallic compound; deposition; microstructure |
|---|
| Abstract | To overcome the undesirable wear of pin-tip during friction stir lap welding (FSLW) of AA6022 aluminum alloy and Usibor® 1500 advanced high strength steel, a precoated Al cold-spray deposition (200 μm in thickness) has been used as the interlayer. The optimized weld shows a simple sandwich-like structure that consists of an aluminum weld, an interface, and a heat affected steel region. No intermetallic compound was found while an Al/Fe diffusion layer with an average thickness of about 10 nm was observed at the deposition/steel interface. No distinct phase transition and mechanical properties change were found in the heat affected steel region. |
|---|
| Publication date | 2018-12-19 |
|---|
| Publisher | Elsevier |
|---|
| In | |
|---|
| Language | English |
|---|
| Peer reviewed | Yes |
|---|
| Export citation | Export as RIS |
|---|
| Report a correction | Report a correction (opens in a new tab) |
|---|
| Record identifier | 207b945e-8a48-4ff3-ba55-8268f3289239 |
|---|
| Record created | 2021-03-12 |
|---|
| Record modified | 2021-03-12 |
|---|
