| DOI | Resolve DOI: https://doi.org/10.1109/IECON48115.2021.9589877 |
|---|
| Author | Search for: Boby, Mathews; Search for: Singh, Sumeet; Search for: Lamarre, Jean-Michel1; Search for: Ibrahim, Maged1; Search for: Bernier, Fabrice1; Search for: Pillay, Pragasen |
|---|
| Affiliation | - National Research Council of Canada. Automotive and Surface Transportation
|
|---|
| Format | Text, Article |
|---|
| Conference | IECON 2021: 47th Annual Conference of the IEEE Industrial Electronics Society, October 13-16, 2021, Toronto, ON, Canada |
|---|
| Subject | impulse magnetizer; permanent magnet rotor; cold spray additive manufacturing; in-situ magnetization; post-assembly magnetization; magnetization; rotors; stators; three-dimensional printing; SPICE; software |
|---|
| Abstract | The design, simulation and testing of an impulse magnetizer and the in-situ post-assembly magnetization of a permanent magnet (PM) rotor manufactured by a cold spray additive manufacturing (AM) using the prototyped magnetizer is presented in this paper. A software based finite element simulation is done to obtain the level of magnetization current required. An impulse magnetizer is built for this specification. A 4-pole rotor with cold-sprayed rectangular magnets is magnetized in this work after assembling it in the stator. Various stator terminal connection configurations are analyzed. The machine is magnetized and the back-EMF waveform and the rotor magnetization profile is obtained. |
|---|
| Publication date | 2021-10-13 |
|---|
| Publisher | IEEE |
|---|
| In | |
|---|
| Language | English |
|---|
| Peer reviewed | Yes |
|---|
| Export citation | Export as RIS |
|---|
| Report a correction | Report a correction (opens in a new tab) |
|---|
| Record identifier | a5789b41-ef85-49d4-98d9-0763194c44f3 |
|---|
| Record created | 2023-01-20 |
|---|
| Record modified | 2023-01-20 |
|---|
